Keywords
short circuit
forensic fire expert
overcurrent
melting
bimetal
wiring
How to Cite
Abstract
In the process of investigating fires, the version of involvement in the occurrence of burning emergency modes in electrical equipment and electrical wiring often becomes one of the main ones. The consequence of the current overload of electrical conductors is the appearance of localized short circuit melting on them.
In the indicated context, the most important stage of the study is the establishment of a direct or reverse causal relationship between a fire and a short circuit. The latter is possible due to the fact that the conductor metal is able to store situational trace information in the microstructure, which fixes the parameters of the state of the metal both during its solidification and after that, together with changes in the physicochemical (primarily temperature) environmental conditions.
The main materials for the production of the most common cable products at the moment are copper and aluminium, which is the reason for the fullness of the existing methodological manuals with the development of instrumental methods for establishing the moment of occurrence of short circuits relative to fire exclusively for copper and aluminium conductors.
Bimetallic conductors undeservedly remained outside the field of view of specialized methodological literature. The fact that this fact is an omission is evidenced by repeated cases of receipt of melted fragments of aluminium-copper wiring as objects of expert research in investigations into the causes of fires.
The article pays special attention to the design of bimetallic conductors and the related features of the morphology of the melted areas to avoid erroneous interpretation of the melting of a short circuit of an aluminium-copper, as the deposition of foreign metal on a monometallic copper conductor.
Also, the purpose of this work was to provide specialists who are to investigate short circuits on bimetallic aluminium-copper conductors, including with a metallographic analysis, information missing in the specialised methodological literature regarding the structural features and chemical composition of the short circuit melting metal on conductors of this type.
An example from the expert practice of studying bimetallic (aluminium-copper). conductors with signs of a short circuit is given.
The data presented in the article are based on studies using optical and scanning electron microscopy.
References
Bolkhovitinov, N. F. (1961). Metal Sci-ence and Thermal Processing. Moscow. 462 p. (in Russian).
Smelkov, G. I. (1984). Fire danger of electrical wiring under emergency condi-tions. Moscow. 184 p. (in Russian).
Smelkov, G. I., Aleksandrov, A. A., Pekhotikov, V. A. (1980). Methods for deter-mining the involvement of emergency modes in electrical devices in fires. Moscow. 58 p. (in Russian).
Cheshko, I. D. (1997). Examination of fires (objects, methods, research methods). St. Petersburg. 560 p. (in Russian).
Cheshko, I. D. (2001). Technical founda-tions of fire investigation: method. allowance Moscow. 254 p. (in Russian).
Mokriak, A. Yu., Cheshko, I. D. (2014). Metallographic analysis of copper conduc-tors exposed to current overload during fire examination. Bulletin of the St. Petersburg University of the State Fire Service of the Ministry of Emergency Situations of Russia. No. 4. P. 51-58. (in Russian).
Mitrichev, L. S., Kolmakov, A. I., Ste-panov, B. V., Rossinskaia, E. R., Vrta-nesian, E. V., Zernov, S. I. (1986). Study of copper and aluminum conductors in short circuit and thermal impact zones: method. rec. Moscow. 44 p. (in Russian).
Development of guidelines for the study of traces of short circuits in order to establish their involvement in the fire: research report 11. 5. 7.-98. Kyiv, 2002. (in Ukrainian).
Bukhanchenko, O. A., Huraliuk, I. V., Za-porozhets, Ye. V. (2014). Methods of re-search of electrical conductors with signs of short circuit. Kyiv. 111 p. (in Ukrainian).
Bimetallic conductors for wires and ca-bles. Retrieved from: https://www.alumi-nas.ru/. (in Russian).
Khaiak, G. S. (1967). Wire drawing from non-ferrous metals and alloys. Moscow. 151 p.
Bimetallic wire. Retrieved from: kabel-s.ru/blog/int/Cablesystems/. (in Russian).
GOST 22265-76. Conductive materials. Terms and Definitions. Retrieved from: https://docs.cntd.ru/document/1200011378. (in Russian).14. Scanning Electron Microscopy and X-Ray Microanalysis 4th Edition, J. Goldstein, DaleE. Newbury, JosephR. Michael, Nicho-las W.M. Ritchie, J. Henry J. Scott, D. C. Joy, Springer, 2018, 550 p.14. Goldstein, J., Newbury, DaleE, Michael, JosephR., Nicholas, W. M., Ritchie, J., Henry J. Scott, Joy, D. C. (2018). Scanning Electron Microscopy and X-Ray Microanaly-sis 4th Edition. Springer. 550 p. (in English).
DSTU Б А.1.1-9-94. Method of electron microscopy of materials. Terms and definitions. (in Ukrainian).
Perekrestov, V. I. (2014). Practical methods of electron microscopy: textbook. Sumy. 241 p. (in Ukrainian).
Zaitsev, D. M., Prystupa, V. V. (2018). Possibilities and prospects of electron mi-croscopy with X-ray fluorescence energy dis-persive microanalysis in forensic examina-tion. Criminalistics andForensics: interdepartmental scientific methodological collection. Issue 63. Part 1. P. 357-369. (in Ukrainian).